Fluid Pump: Service and Repair

Oil Pump Replacement
Removal Procedure
1. Remove the case side cover.





2. Remove the wiring harness as necessary.





3. Remove the oil pump to valve body bolts.
4. Inspect the oil pump for foreign debris, clean or replace as necessary.

Installation Procedure





1. Install the oil pump to the valve body.

Notice: Use a torque wrench to tighten the pump to valve body bolts. Do not exceed the torque specifications.

Notice: Refer to Fastener Notice in Service Precautions.





2. Install the oil pump to valve body bolts.
Tighten the valve body bolts to 8 Nm (70 inch lbs.).





3. Install the wiring harness, if removed.
4. Install the case side cover.
5. Fill the transaxle to the proper level.
6. Inspect the transaxle fluid level.
7. Inspect for fluid leaks.