Mirror Face Replacement

Mirror Face Replacement

Removal Procedure





1. Apply pressure to the lower inboard corner of the mirror face.
2. Grasp the mirror backing plate (3) at the upper outboard corner.
3. Twist downward and pull back in order to remove the mirror face from the mirror assembly.
4. Disconnect the electrical connectors.



Installation Procedure





1. Connect the electrical connectors.
2. Install the insulator (2)




3. Align the latches on the mirror backing plate to the tabs (1) on the power mirror motor.
4. Carefully press the mirror and backing plate into place until an audible click is heard.
5. Verify proper operation of the power mirror.