Programming Features With the Driver Information Center (DIC)

ENTER PROGRAMMING
To enter programming with the DIC, perform the following actions:
1. Turn the ignition to RUN.
2. Place the vehicle in PARK.
3. Press any DIC button.
4. Press the ENG/MET button for 5 seconds.
5. The DIC displays WELCOME TO BUICK OPTION FEATURE.
6. The DIC then displays the driver number and ARMREST BUTTON CHANGES DRIVER #.
7. To change the driver # for this programming session, press the appropriate memory seat button.
8. Press the RESET button in order to advance to the next option.

PARALLEL PARK ASSIST
Continue with the following steps in order to personalize the parallel park assist feature:
1. The DIC displays PARALLEL PARK: OFF/ON.
2. Press the ENG/MET button to place the arrow before the desired choice.
3. Press the RESET button in order to advance to the next option.

AUTOMATIC DOOR LOCKS
Continue with the following steps in order to personalize the automatic door locks:
1. The DIC displays AUTO DOOR LOCKS: OFF/ON.
2. Press the ENG/MET button to place the arrow before the desired choice.
3. Press the RESET button in order to advance to the next option.
4. If the previous choice was AUTO DOOR LOCKS ON, the DIC displays UNLOCK: OFF/ON.
5. Press the ENG/MET button to place the arrow before the desired choice.
6. Press the RESET button in order to advance to the next option.
7. If the previous choice was UNLOCK ON, the DIC displays WHICH DOORS: ALL/ DRIVER.
8. Press the ENG/MET button to place the arrow before the desired choice.
9. Press the RESET button in order to advance to the next option.

DELAYED LOCKING
Continue with the following steps in order to personalize the delayed locking feature:
1. The DIC displays DELAYED LOCKING: OFF/ON.
2. Press the ENG/MET button to place the arrow before the desired choice.
3. Press the RESET button in order to advance to the next option.

REMOTE ACTIVATION VERIFICATION
Continue with the following steps in order to personalize the remote activation verification feature:
1. The DIC displays LOCK FEEDBACK: OFF/ON.
2. Press the ENG/MET button to place the arrow before the desired choice.
3. Press the RESET button in order to advance to the next option.
4. If the previous choice was LOCK FEEDBACK ON, the DIC displays LOCK FEEDBACK: LIGHTS/LIGHTS+HORN
5. Press the ENG/MET button to place the arrow before the desired choice.
6. Press the RESET button in order to advance to the next option.
7. The DIC displays UNLOCK FEEDBACK: OFF/LIGHTS appears on the display.
8. Press the ENG/MET button to place the arrow before the desired choice.
9. Press the RESET button in order to advance to the next option.

PERIMETER LIGHTING
Continue with the following steps in order to personalize the perimeter lighting:
1. The DIC displays PERIMETER LIGHTS: OFF/ON.
2. Press the ENG/MET button to place the arrow before the desired choice.
3. Press the RESET button in order to advance to the next option.

MEMORY SEATS
Continue with the following steps in order to personalize the memory seat recall:
1. The DIC displays SEAT RECALL: OFF/ON.
2. Press the ENG/MET button to place the arrow before the desired choice.
3. Press the RESET button in order to advance to the next option.
4. If the last choice was SEAT RECALL ON, the DIC displays RECALL POSITION: MEMORY/EXIT.
5. Press the ENG/MET button to place the arrow before the desired choice.
6. Press the RESET button in order to advance to the next option.

PASSENGER WINDOW LOCK-OUT
Continue with the following steps in order to personalize the passenger window lock-out feature:
1. The DIC displays WINDOW LOCKOUT: ALL PASS/REAR.
2. Press the ENG/MET button to place the arrow before the desired choice.
3. Press the RESET button in order to advance to the next option.

EXIT PROGRAMMING
When the programming is complete, OPTION FEATURE SELECTION DONE appears on the display. To exit programming before the list is complete, press any of the following DIC buttons:
^ ODO/TRIP
^ FUEL INFO
^ GAGE INFO