Instrument Panel (IP) - End Bracket Replacement - Right

Bracket Replacement - Instrument Panel (I/P) End Right

Removal Procedure

1. Remove the IP assembly. Refer to Instrument Panel (I/P) Assembly Replacement (Instrument Panel (IP) - Assembly Replacement) .




2. Remove the fasteners (2) from the right IP end bracket (1) to the A-pillar.
3. Remove the right IP end bracket (1).



Installation Procedure





1. Install the right IP end bracket (1) to the A-pillar.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the fasteners (2) to the right IP end bracket (1).

Tighten the fasteners to 55 N.m (41 lb ft).

3. Install the IP assembly. Refer to Instrument Panel (I/P) Assembly Replacement (Instrument Panel (IP) - Assembly Replacement) .