Instrument Panel Cluster (IPC) - Replacement

REMOVAL PROCEDURE




1. Remove the IP cluster trim plate.
2. Place a protective cloth on the steering column to protect the column from scratches.
3. Remove the cluster fasteners (2).
4. Remove the instrument cluster (1).




5. Disconnect the electrical connector (1) from the cluster.

INSTALLATION PROCEDURE




1. Connect the instrument cluster electrical connector (1).




2. Install the instrument cluster (1).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the fasteners (2).

Tighten
Tighten the fasteners to 1.5 N.m (14 lb in).

4. Install the IP cluster trim plate.