Scan Tool Data Definitions

Auxiliary Lighting: The scan tool displays On/Off. The state of exterior lighting demand request from the remote control door lock receiver (RCDLR).

Battery Voltage: The scan tool displays 0 - 20 volts. The voltage as received on the battery positive voltage circuit of the module.

Courtesy Lamp Output: The scan tool displays On/Off. The commanded state of the courtesy lamps.

Courtesy Switch: The scan tool displays On/Off. The state of the input request from the courtesy lamp switch.

Drivers Dome/Buzzer Sw.: The scan tool displays On/Off. The state of the drivers door jamb switch. On indicates the door is open and Off indicates the door is closed.

Exterior Lamp Output: The scan tool displays On/Off. The commanded state of the exterior lights.

High Beam Switch: The scan tool displays On/Off. The state of the headlamp dimmer switch.

Inadvert. Power Output: The scan tool displays On/Off. The state of courtesy lamps supply voltage circuit.

LCM Headlamp Sw. Status: The scan tool displays On/Off. The state of the headlamp switch.

LR Dome/Buzzer Switch: The scan tool displays On/Off. The state of the left rear door jamb switch. On indicates the door is open and Off indicates the door is closed.

Lt. Turning Signal Sw.: The scan tool displays On/Off. The state of the left turn signal switch.

Park Lamp Input: The scan tool displays On/Off. The state of park lamps.

Pass. Dome/Buzzer Sw.: The scan tool displays On/Off. The state of the right front door jamb switch. On indicates the door is open and Off indicates the door is closed.

Perimeter Lamp Output: The scan tool displays On/Off. The commanded state of the perimeter lights.

RR Dome/Buzzer Switch: The scan tool displays On/Off. The state of the right rear door jamb switch. On indicates the door is open and Off indicates the door is closed.

Rt. Turning Signal Sw.: The scan tool displays On/Off. The state of the right turn signal switch.

Theater Dimming 1: The scan tool displays On/Off. The state of the interior lamps.

Theater Dimming 1: The scan tool displays On/Off. The commanded state interior lamp ground.

Theater Dimming 2: The scan tool displays On/Off. The state of the interior lamps.

Theater Dimming 2: The scan tool displays On/Off. The commanded state interior lamp ground.