Inflatable Restraint Side Impact Module Harness Replacement

REMOVAL PROCEDURE

CAUTION: Refer to SIR Inflator Module Handling And Storage Caution in Service Precautions.




1. Disable the SIR system. Refer to Air Bag(s) Arming and Disarming.

IMPORTANT: Removal of the right or the left inflatable restraint side impact module wiring harness uses the same procedure.

2. Remove the inflatable restraint side impact module (2) from the seat (1).
With the seat back panel removed, the inflatable restraint side impact module wiring harness (3) will be exposed.
3. Remove the retaining clips that fasten the side impact module wiring harness (3) to the seat (1).

INSTALLATION PROCEDURE




1. Install the new side impact module wiring harness (3) to the seat (1).
2. Install the retaining clips that fasten the side impact module wiring harness (3) to the seat (1).
3. Install the side impact module (2) to the seat (1).
4. Enable the SIR system. Refer to Air Bag(s) Arming and Disarming.