Tilt Spring

Tilt Spring Replacement - Steering Column

Removal Procedure

Caution: Refer to SIR Caution in Service Precautions.

1. Disable the SIR system.
2. Remove the steering column trim covers.
3. Use the tilt lever to tilt the column in the UP position.





4. Remove the tilt spring (1).

Installation Procedure





1. Lubricate tilt spring guide with synthetic grease.
2. install the tilt spring guide into the tilt spring.





3. Install the tilt spring (1).
4. Install the steering column trim covers.
5. Enable the SIR system.