Radio/Stereo: Service and Repair

REMOVAL PROCEDURE




1. Remove the instrument panel (I/P) cluster trim plate.
2. Remove the radio screws.
3. Disconnect the electrical connector and the coaxial cable connector from the radio.
4. Remove the radio from the I/P.

INSTALLATION PROCEDURE




1. Connect the electrical connector and the coaxial cable connector to the radio.
2. Install the radio to the I/P.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the radio screws.

Tighten
Tighten the screws to 2 N.m (18 lb in).

4. Install the cluster trim plate.