91. Supercharger Installation

Supercharger Installation





1. Install the supercharger gasket.
2. Install the supercharger.

Notice: Refer to Fastener Notice in Service Precautions.





3. Install the spacers, bolts, and stud to the supercharger in the proper locations.
Tighten the stud/bolts to 23 Nm (17 ft. lbs.).





4. Install the throttle body and gasket.
5. Install the throttle body nuts.
Tighten the throttle body nuts to 10 Nm (89 inch lbs.).





6. Install the engine wiring harness heat shield.
7. Install the engine wiring harness heat shield bolt and nut.
Tighten the engine wiring harness heat shield bolt and nut to 10 Nm (89 inch lbs.).





8. Install the MAP sensor bracket.
9. Install the MAP sensor bracket bolts.
Tighten the MAP sensor bracket bolts to 30 Nm (22 ft. lbs.).
10. Install the vacuum block.
11. Install the vacuum block bolts.
Tighten the vacuum block bolts to 10 Nm (89 inch lbs.).
12. Install the boost solenoid.
13. Install the boost solenoid bolts.
Tighten the boost solenoid bolts to 26 Nm (19 ft. lbs.).
14. Install the regulator valve and harness bolt.
15. Install the booster bypass.





16. Install the booster bypass nut.
Tighten the booster bypass nut to 10 Nm (89 inch lbs.).





17. Install the fuel rail.
18. Install the fuel rail nuts and stud.
Tighten the fuel rail nuts and stud to 10 Nm (89 inch lbs.).
19. Install the vacuum line to the fuel rail.
20. Install the spark plug wires.