86. Exhaust Manifold Installation - Left
Exhaust Manifold Installation - LeftNotice: Refer to Fastener Notice in Service Precautions.
1. Install the exhaust manifold studs.
Tighten the exhaust manifold studs to 10 Nm (89 inch lbs.).
2. Install the exhaust manifold gasket.
3. Install the exhaust manifold.
4. Install the exhaust manifold bolts and nuts.
Tighten the exhaust manifold bolts and nuts to 30 Nm (22 ft. lbs.).
5. Install the left side spark plugs.
- Tighten the spark plugs to 27 Nm (20 ft. lbs.) when installing the spark plugs in to a new cylinder head.
- Tighten the spark plugs to 15 Nm (13 ft. lbs.) when re-installing the spark plugs after initial installation.
6. Install the left engine lift hook.
7. Install the left engine lift hook nut and bolt.
Tighten the left engine lift hook nut and bolt to 30 Nm (22 ft. lbs.).
8. Install the left exhaust manifold heat shield.
9. Install the left exhaust manifold heat shield nuts.
Tighten the left exhaust manifold heat shield nuts to 20 Nm (15 ft. lbs.).