Electronic Park Lock Switch
Electronic Park Lock Switch ReplacementRemoval Procedure
1. Remove the trim covers from the steering column.
2. Disconnect the electrical connector (2) from the park lock module (3).
3. Remove the screw (1) from the park lock module (3).
4. Using a flat tipped screwdriver, push the tab in on the park lock module (2) and pull to remove it from the steering column (1).
Installation Procedure
1. Install the park lock module (2) to the steering column (1).
2. Install the screw (1) to the park lock module (3).
3. Connect the electrical connector (2) to the park lock module (3)
4. Install the trim covers to the steering column.
5. Check the operation of the park lock module (3).