Front Door Window Glass: Service and Repair

Window Replacement - Front Door

Removal Procedure

1. Remove the trim panel. Refer to Trim Panel Replacement - Side Front Door (Service and Repair) .
2. Remove the water deflector. Refer to Water Deflector Replacement - Front Door Service and Repair
3. Remove the front door inner sealing strip. Refer to Sealing Strip Replacement - Front Door Window Belt Inner (Front Side Door Window Belt Inner Sealing Strip Replacement) .




4. Remove the window to regulator bolts (2).




5. Remove the window from the door.



Installation Procedure





1. Position the window between the inner and the outer panels.
2. Point the lower front corner of the window down.
3. Pass the window through the belt opening.
Align the edges with the door window weatherstrip.
4. Turn the window to the horizontal position.
Align the holes in the window with the holes in the regulator. Ensure that both sealing lips on the front door outer belt sealing strip are not rolled over and pointing downward. If this condition is present, the window will not raise correctly.





Notice: Refer to Fastener Notice in Cautions and Notices.

5. Install the window to regulator bolts (2). Tighten the forward bolt first.

Tighten the window to regulator bolts to 10 Nm (89 lb in).

6. Install the front door inner sealing strip. Refer to Sealing Strip Replacement - Front Door Window Belt Inner (Front Side Door Window Belt Inner Sealing Strip Replacement) .
7. Install the water deflector. Refer to Water Deflector Replacement - Front Door Service and Repair
8. Install the trim panel. Refer to Trim Panel Replacement - Side Front Door (Service and Repair) .