Front Door Switch Replacement

FRONT DOOR SWITCH REPLACEMENT

REMOVAL PROCEDURE




1. Insert a flat-bladed tool under the front edge of the switch plate.
2. Gently pry upwards in order to release the front edge of the switch plate from the door trim panel.
3. Slide the switch forward in order to release the rear retainer tabs.
4. Disconnect the electrical connectors.




5. Remove the switch pack (2) from the switch plate (1) by releasing the retainer tabs with a small flat-bladed tool.

INSTALLATION PROCEDURE




1. Snap the switch pack into the switch plate.
2. Connect the electrical connectors.
3. Install the tabs at the rear end of the switch plate under the door trim panel.
4. Press down on the front of the switch plate in order to engage the retainer clip.