Power Mirrors - Memory Recall Position Inaccurate

POWER MIRRORS - MEMORY RECALL POSITION INACCURATE

TEST DESCRIPTION

Steps 1-3:

Steps 4-7:

Steps 8-11:

The numbers below refer to the step numbers on the diagnostic table.
3. This step determines if the mirror sensors are capable of sensing mirror position changes.
5. This step verifies that the module has the appropriate voltage available at both the vertical and horizontal position sensor signal circuits. With the door module C4 harness connector disconnected, both the horizontal and the vertical position sensor signal circuits within the module should display their highest value of 4.5 - 5.5 volts.