Vanity Mirror Replacement

Vanity Mirror Replacement

Removal Procedure





1. Open the vanity cover (1).
2. Use a thin-bladed tool in order to disengage the 5 front snap legs (4) at the lower edge of the sunshade.
3. Pull out and down in order to remove the vanity (5).
4. Note the wire routing for re-assembly.
5. Disconnect the wire connectors from the vanity (5) on vehicles equipped with a lighted vanity.



Installation Procedure

1. Ensure that the wires are correctly routed.
2. Connect the wire connectors.




3. Insert the top end of the vanity (5) into the sunshade.
4. Engage the snap legs (4).
5. Close the vanity mirror.