Front Seat Armrest Replacement
ARMREST REPLACEMENT - FRONT SEATREMOVAL PROCEDURE
1. Remove the front seat retaining bolts.
2. Tilt the back of the seat upward but do not remove.
3. Remove the rear air deflector duct from the bottom of the armrest.
4. Remove the 4 retaining nuts securing the center armrest to the seat assembly.
5. Remove the center armrest assembly.
INSTALLATION PROCEDURE
1. Install the center armrest to the seat assembly.
2. Install the 4 nuts in order to secure the center armrest to the seat.
3. Tighten the retaining nuts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the 4 retaining nuts to 24 N.m (18 lb ft).
4. Install the rear air deflector duct to the bottom of the armrest.
5. lower the back of the seat down.
6. Install the front seat retaining bolts.