Seat Adjuster Replacement - Front

Seat Adjuster Replacement - Front

Removal Procedure

Caution: Refer toSIR Caution in Cautions and Notices.
1. Remove the front seat. Refer toSeat Replacement (Seat Replacement) .
2. Remove the seat cushion. Refer to Seat Cushion Replacement - Front (Seat Cushion Replacement - Front) .




3. Remove the bolt retaining the seat belt retractor to the adjuster.




4. Release the J-hook retainers at the bottom of the seat back trim (19).
5. Roll the seat back trim cover up enough to access the seat back frame retaining bolts (16,17).
6. Disconnect electrical wiring to the seat back.
7. Remove the retaining bolts (16,17).
8. Remove the seat back.




9. Remove the nut retaining the seat belt buckle to the adjuster.




10. Remove the horizontal actuator (4). Refer to Actuator Replacement - Horizontal (Actuator Replacement - Horizontal) .



Installation Procedure





1. Install the horizontal actuator (4). Refer to Actuator Replacement - Horizontal (Actuator Replacement - Horizontal) .




2. Install the seat belt buckle to the adjuster. Refer to Seat Belt Buckle Replacement - Left Front or Seat Belt Buckle Replacement - Right Front in Seat Belts.




3. Release the J-hook retainers at the bottom of the seat back trim (19).
4. Position the seat back to the adjuster.

Notice: Refer to Fastener Notice in Cautions and Notices.

5. Install the bolts (16,17).

Tighten the bolts (16,17) to 26 N.m (19 lb ft).

6. Connect the electrical wiring from the seat back.
7. Connect the seat back cover J-hook retainers.




8. Install the seat belt retractor to the adjuster.
9. Install the seat belt retractor bolt.

Tighten the seat belt retractor bolt to 24 N.m (18 lb ft).

10. Install the seat cushion. Refer to Seat Cushion Replacement - Front (Seat Cushion Replacement - Front) .
11. Install the front seat. Refer toSeat Replacement (Seat Replacement) .
12. If the vehicle is equipped with memory seats, calibrate the seat. Refer to Memory Seat Calibration Procedure.