B1334
DTC B1334CIRCUIT DESCRIPTION
The battery teed circuit, from the DOOR LOCKS fuse to the BCM, provides power for the door locks
CONDITIONS FOR RUNNING THE DTC
- The BCM must be powered.
- The voltage on the battery teed circuit, from the DOOR LOCKS fuse to the BCM must be between 9-16 volts.
CONDITIONS FOR SETTING THE DTC
The BCM detects that the circuit from the DOOR LOCKS fuse to the BCM is less than 1 volt for 300 milliseconds.
ACTION TAKEN WHEN THE DTC SETS
The BCM stores DTC B1334 in memory.
CONDITIONS FOR CLEARING THE DTC
- A current DTC B1334 will clear if the BCM no longer detects the fault.
- A history DTC B1334 will clear after 100 consecutive ignition cycles if the condition for the malfunction is no longer present.
TEST
