Hood Latch Release Handle Replacement

Hood Latch Release Handle Replacement

Removal Procedure





1. Remove the instrument panel insulator. Refer to Closeout/Insulator Panel Replacement - Left (Service and Repair) in Instrument Panel, Gages, and Console.
2. Remove the bolts from the hood latch release handle.




3. Remove the hood release cable from the hood release handle.
4. Remove the hood release handle from the instrument panel.



Installation Procedure





1. Install the hood release cable to the hood release handle.




2. Install the hood release handle to the instrument panel.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the bolts to the hood latch release handle.

Tighten the bolts to 2 N.m (18 lb in).

4. Install the instrument panel insulator. Refer to Closeout/Insulator Panel Replacement - Left (Service and Repair) in Instrument Panel, Gages, and Console.