Procedures

SEAT SWITCH REPLACEMENT - POWER

REMOVAL PROCEDURE




1. Remove the front seat cushion outer trim panel.
2. Remove the screws from the seat switch to the trim panel.




3. Disconnect the electrical connector from the power front seat switch.
4. Remove the power front seat switch from the vehicle.

INSTALLATION PROCEDURE




1. Connect the electrical connector to the power front seat switch.

NOTE: Refer to Fastener Notice in Service Precautions.




2. Install the screws to the seat switch to the trim panel.

Tighten
Tighten the screws to 3 N.m (27 lb in).

3. Install the front seat cushion outer trim panel.