Cupholder Replacement - Rear Seat
CUPHOLDER REPLACEMENT - REAR SEATREMOVAL PROCEDURE
1. Open the armrest lid.
2. Rotate the cup holder to its open position.
3. To release the cupholder assembly, use a twisting motion to slide the left side mounting pin rearward through the formed slot in the armrest wall.
4. Remove the cup holder.
INSTALLATION PROCEDURE
1. Position the cup holder in the armrest.
2. Insert the right side pin into the hole in the storage box.
3. Slide the left side pin forward through the formed slot until positive engagement of the pin is felt.
4. Rotate the cup holder to its closed position.
5. Close the armrest lid.