92. Supercharger Installation

Supercharger Installation





1. Install the supercharger gasket.





2. Install the supercharger.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the spacers, bolts, and stud to the supercharger in the proper locations.
^ Tighten the stud/bolts to 23 Nm (17 ft. lbs.).





4. Install the throttle body and gasket.
5. Install the throttle body nuts.
^ Tighten the throttle body nuts to 10 Nm (89 inch lbs.).





6. Install the engine wiring harness heat shield.
7. Install the engine wiring harness heat shield bolt and nut.
^ Tighten the engine wiring harness heat shield bolt and nut to 10 Nm (89 inch lbs.).





8. Install the MAP sensor bracket.
9. Install the MAP sensor bracket bolts.
^ Tighten the MAP sensor bracket bolts to 30 Nm (22 ft. lbs.).
10. Install the vacuum block.
11. Install the vacuum block bolts.
^ Tighten the vacuum block bolts to 10 Nm (89 inch lbs.).
12. Install the boost solenoid.
13. Install the boost solenoid bolts.
^ Tighten the boost solenoid bolts to 26 Nm (19 ft. lbs.).
14. Install the regulator valve and harness bolt.





15. Install the booster bypass.
16. Install the booster bypass nut.
^ Tighten the booster bypass nut to 10 Nm (89 inch lbs.).





17. Install the fuel rail.
18. Install the fuel rail nuts and stud.
^ Tighten the fuel rail nuts and stud to 10 Nm (89 inch lbs.).
19. Install the vacuum line to the fuel rail.
20. Install the spark plug wires.