Heater Pipe Adapter Replacement - Outlet
TOOLS REQUIREDJ 38185 Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the cooling system.
2. Remove the fuel injector sight shield.
3. Remove the heater outlet hose from the pipe adapter.
4. Use J 38185 in order to reposition the heater hose clamp.
5. Remove the heater pipe adapter mounting bolt.
6. Remove the heater pipe adapter.
INSTALLATION PROCEDURE
1. Lubricate the O-ring with coolant.
2. Install the pipe adapter.
3. Install the heater outlet pipe adapter mounting bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolt to 6 N.m (53 lb in).
4. Install the heater outlet hose to the pipe adapter.
5. Use J 38185 in order to reposition the heater core hose clamp.
6. Install the fuel injector sight shield.
7. Fill the cooling system.