Fog/Driving Lamp: Service and Repair

FOG LAMP REPLACEMENT - FRONT

REMOVAL PROCEDURE




1. Remove the front bumper fascia deflector.
2. Disconnect the electrical connector from the front fog lamp assembly.




3. Remove the fog lamp bulb/socket from the fog lamp by rotating counterclockwise.




4. Remove the front fog lamp nuts from the front bumper impact bar.
5. Remove the front fog lamp assembly from the vehicle.

INSTALLATION PROCEDURE




1. Position the front fog lamp assembly to the front bumper impact bar.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the front fog lamp nuts to the front bumper impact bar.

Tighten
Tighten the nuts to 10 N.m (89 lb in).




3. Install the fog lamp bulb/socket to the fog lamp by rotating clockwise.




4. Connect the electrical connector to the front fog lamp assembly.
5. Install the front bumper fascia deflector.
6. Check and adjust the front fog lamp aim as necessary. Refer to Fog Lamp Aiming Procedure.