Heater Hose Replacement - Outlet
TOOLS REQUIREDJ 38185 Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the cooling system.
2. Remove the fuel injector sight shield.
3. Use J 38185 in order to position aside the heater hose outlet clamp at the pipe adapter.
4. Disconnect the heater outlet hose from the pipe adapter.
5. Remove the heater hose support bracket nut (1).
6. Use J 38185 in order to position aside the heater core outlet hose clamp.
7. Disconnect the heater outlet hose from the heater core.
8. Separate the support bracket and remove the heater outlet hose.
INSTALLATION PROCEDURE
1. Install the heater outlet hose and support bracket.
2. Connect the heater outlet hose to the heater core.
3. Use J 38185 in order to secure the heater core hose outlet clamp.
IMPORTANT: Position heater core hose clamps in the indicated location.
4. Install the heater hose support bracket.
5. Install the heater hose support bracket nut (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nut to 4.5 N.m (40 lb in).
6. Connect the heater outlet hose to the pipe adapter.
7. Use J 38185 in order to secure the heater hose outlet clamp.
8. Install the fuel injector sight shield.
9. Refill the cooling system.