Exhaust Gas Recirculation (EGR) Outlet Pipe Replacement

REMOVAL PROCEDURE




1. Remove the air cleaner intake duct.
2. Remove the exhaust gas recirculation (EGR) outlet pipe bolt (3) from the intake manifold.
3. Remove the EGR outlet pipe nut (2) from the EGR valve inlet adapter pipe.
4. Remove the EGR valve outlet pipe (1).

INSTALLATION PROCEDURE




1. Install the EGR valve outlet pipe (1).
2. Install the EGR outlet pipe bolt (3) to the intake manifold.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the bolt to 30 N.m (22 lb ft).

3. Install the EGR outlet pipe nut (2) to the EGR valve inlet adapter pipe.

Tighten
Tighten the nut to 30 N.m (22 lb ft).

4. Install the air cleaner intake duct.