Air Temperature Switch Assembly Replacement - Right

AIR TEMPERATURE SWITCH ASSEMBLY REPLACEMENT - RIGHT

REMOVAL PROCEDURE
1. Remove the right instrument panel (I/P) trim plate.




2. Remove the 2 retaining screws (1) from the right air temperature switch assembly.
3. Remove the right air temperature switch assembly.

INSTALLATION PROCEDURE
1. Install the right air temperature switch assembly into the trim plate.




2. Install the screws (1).

Tighten the screws to 1.4 N.m (12 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the I/P trim plate.