Collision Avoidance and Parking Assist Systems: Service and Repair

INFORMATION CENTER TELLTALE ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE




1. Insert your fingers between the headliner and the information center telltale assembly bezel and gently pull down to release the display bezel.




2. Use a screwdriver to release the locking tab at the rear of the telltale assembly.




3. Tilt the display down and pull down to remove.
4. Disconnect the electrical connector.

INSTALLATION PROCEDURE




1. Connect the electrical connector to the information center telltale assembly.
2. Insert the display into the headliner until locking tab locks into position. It may be necessary to rock the display into position.
3. Install bezel by pushing it up until the tabs lock into position.