Scan Tool Data Definitions

Scan Tool Data Definitions

Commanded Fan 1 / Commanded Fan 2
Scan tool displays ON or OFF. Represents the Powertrain Control Module (PCM) commanded state of the fan 1 (low Speed) and fan 2 (high speed) control circuits.

Coolant Hot Lamp
The scan tool displays ON/OFF. The scan tool displays ON when the engine coolant is above 151°C (260°F).

Coolant Temperature
The scan tool displays -40°C to +151°C (-40°F to +304°F). This data is the coolant temperature the Instrument Cluster is attempting to display on the coolant temperature gage.

ECT
The scan tool displays -40°C to +151°C (-40°F to +304°F). The Engine Coolant Temperature (ECT) sensor is mounted in the coolant stream. The PCM applies 5 volts to the ECT sensor circuit. The sensor is a thermistor which changes internal resistance as temperature changes. When the sensor is cold (internal resistance high), the PCM monitors a high signal voltage and interprets it as a cold engine. As the sensor warms (internal resistance decreases), the voltage signal decreases and the PCM interprets the lower voltage as a warm engine.

FC Relay 1
The scan tool displays OK or Fault. This parameter indicates the state of the driver circuit for this device.

FC Relay 2 and 3
The scan tool displays OK or Fault. This parameter indicates the state of the driver circuit for this device.