Instrument Panel (IP) - End Bracket Replacement - Left

BRACKET REPLACEMENT - INSTRUMENT PANEL (I/P) END LEFT

REMOVAL PROCEDURE
1. Remove the IP assembly.




2. Remove the fasteners (2) from the left IP end bracket (1) to the A-pillar.
3. Remove the left IP end bracket (1).

INSTALLATION PROCEDURE




1. Install the left IP end bracket (1) to the A-pillar.
2. Install the fasteners (2) to the left IP end bracket.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bracket fasteners to 55 N.m (41 lb ft).

3. Install the IP assembly.