Heater Pipe Adapter - Outlet

HEATER PIPE ADAPTER REPLACEMENT - OUTLET

TOOLS REQUIRED
J 38185Hose Clamp Pliers

REMOVAL PROCEDURE
1. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System.




2. Disconnect the heater hose from the heater outlet pipe adapter using the J 38185.




3. Remove the bolt from the heater pipe adapter (2).
4. Remove the heater outlet pipe adapter (2) from the engine.

INSTALLATION PROCEDURE




1. Install the heater outlet pipe adapter (2) to the engine.
2. Install the heater pipe adapter bolt.

Tighten the bolt to 10 N.m (89 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.




3. Connect the heater hose to the heater pipe adapter and reposition the clamp using the J 38185.
4. Fill the cooling system. Refer to Draining and Filling Cooling System in Cooling System.