Fuel Injector Circuit Diagnosis

FUEL INJECTOR CIRCUIT DIAGNOSIS

CIRCUIT DESCRIPTION
The control module enables the appropriate fuel injector on the intake stroke for each cylinder. An individual ignition 1 voltage is supplied directly to each of the fuel injectors. The control module controls each fuel injector by grounding the control circuit via a solid state device called a driver.

DIAGNOSTIC AIDS
- Monitoring the fuel injector circuit status with a scan tool while moving the fuel injector harness may help to isolate an intermittent condition.
- Performing the Fuel Injector Coil Test may help isolate an intermittent condition. Refer to Fuel Injector Coil Test. Component Tests and General Diagnostics
- For an intermittent condition, refer to Intermittent Conditions. Intermittent Conditions

TEST DESCRIPTION

Steps 1-7:

The numbers below refer to the step numbers on the diagnostic table.
4. This step tests for a short to ground on the ignition 1 voltage supply circuit of the fuel injector.
5. This step tests for a short to ground on the ignition 1 voltage supply circuit of the fuel injector.