Camshaft Bearing

Use the following procedure to install the camshaft bearings:
Assemble J 33049 according to the manufacturer's instructions.
Place the bearing on the tool.

Notice: Severe engine damage may result if the oil holes are not correctly aligned.

Index the bearing oil holes with the engine block oil passages

Camshaft Bearing Inside Diameter-Front and Rear 46.970 - 46.934 mm (1.8428 - 1.8492 inch)
Camshaft Bearing Inside Diameter-Middle #2, #3 46.977 - 46.942 mm (1.8481 - 1.8495 inch)
Camshaft Bearing Inside Diameter 1 and 4 46.970 - 46934 mm (18478 - 18492 inch)
Camshaft Bearing Inside Diameter 2 and 3 46.977 - 46.942 mm (1.8481 - 1.8495 inch)