Radio Antenna Module Replacement

RADIO ANTENNA MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Lower the rear of the headliner. Refer to Headliner Replacement in Interior Trim.
2. Remove the antenna module bolt.
3. Disconnect the antenna module electrical connector.
4. Disconnect the antenna coaxial cable.
5. Disconnect the rear window antenna lead from the rear window antenna connector.
6. Remove the antenna module.

INSTALLATION PROCEDURE




1. Connect the rear window antenna lead to the rear window antenna connector.
2. Connect the antenna coaxial cable.
3. Connect the antenna module electrical connector.
4. Install the antenna module and the antenna module bolt.

Tighten the bolt to 3 N.m (27 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.

5. Install the headliner.