Coaxial Cable Replacement - Cellular Telephone (Instrument Panel Extension)

COAXIAL CABLE REPLACEMENT - CELLULAR TELEPHONE (INSTRUMENT PANEL EXTENSION)

REMOVAL PROCEDURE




1. Remove the right instrument panel (I/P) insulator.
2. Remove the passenger lower pillar trim.
3. Pull back the carpet for access.
4. Disconnect the body antenna cable from the I/P mobile telephone antenna cable.




5. Disconnect the I/P antenna cable from the communication interface module by pulling down on the square plastic housing.
6. Cut off the visible ends of the I/P antenna cable.

INSTALLATION PROCEDURE




1. Connect the I/P antenna cable to the communication interface module by pushing on the square plastic housing.
2. Route the I/P antenna cable along the I/P harness.
3. Secure the I/P antenna cable to the I/P harness.




4. Connect the body antenna cable to the I/P antenna cable.
5. Install the carpet.
6. Install the passenger lower pillar trim.
7. Install the right I/P insulator.