Compartment Trim Panel Replacement - Rear

Compartment Trim Panel Replacement - Rear

Tools Required

J 38778 Door Trim Pad Clip Remover

Removal Procedure

1. Open the rear compartment.
2. If equipped, remove the rear compartment convenience net and net retainers.
3. Remove the sill plate.
4. Remove the floor trim panel.
5. Remove the seat back.




6. Use J 38778 to remove the push-in retainers from the trim panels.
7. Slide the panels off the metal supports.
8. Remove the trim panels from the rear compartment.

Installation Procedure

1. Position the trim panels in the rear compartment.
2. Position the trim panels on the metal supports by the rear seat back.




3. Install the push-in retainers.
4. Install the floor trim panel.
5. Install the seat back.
6. Install the sill plate.
7. Install the rear compartment convenience net, if equipped.
8. Close the rear compartment.