Oil Level Sensor: Service and Repair

Engine Oil Level Sensor and/or Switch Replacement
Removal Procedure





1. Drain the engine oil. Refer to Engine Oil and Oil Filter Replacement.
2. Disconnect the electrical connector from engine oil level switch.
3. Remove the engine oil level switch from the oil pan.

Installation Procedure





1. Install the engine oil level switch to the oil pan.

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the engine oil level switch bolt.
^ Tighten the engine oil level switch bolt to 10 Nm (89 inch lbs.).
3. Connect the electrical connector to engine oil level switch.
4. Fill the engine oil. Refer to Engine Oil and Oil Filter Replacement.
5. Inspect for oil leaks after engine start up.