Sunroof / Moonroof: Adjustments

SUNROOF WINDOW HEIGHT AND OPENING FIT ADJUSTMENT




1. Slide the sunroof sunshade to the open position.
2. Adjust the sunroof to the fully closed position.
3. Loosen the sunroof window panel screws.
4. Individually adjust the 4 corners of the sunroof window panel.
5. Adjust the front of the sunroof window panel to 0.5 mm (0.020 in) below the top surface (3) of the roof panel.
6. Adjust the rear of the sunroof window panel to 0.5 mm (0.020 in) above the top surface (2) of the roof panel.




7. Tighten the sunroof window panel screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the sunroof window panel screws to 4 N.m (35 lb in).

8. Close the sunshade.