2. Crankshaft Balancer Removal

Crankshaft Balancer Removal

Tools Required
^ J37096 Flywheel Holder
^ J38197-A Crankshaft Balancer Remover





1. Use J37096 in order to hold the flywheel.





2. Remove the crankshaft balancer bolt.





3. Use the J38197-A in order to remove the crankshaft balancer.

Important: Do not separate the crankshaft pulley from the crankshaft balancer. Service the crankshaft pulley and the crankshaft balancer as an assembly.

1. Invert J38197-2 so the leg of the tool is facing away from the crankshaft balancer.
2. Install the silver screws J38197-4 to the crankshaft balancer.
3. Turn J38197-1 to remove the crankshaft balancer from the crankshaft.
4. Remove J38197-1, J38197-2, and J38197-4 from the crankshaft balancer.