9. Intake Manifold Removal - Upper

Intake Manifold Removal - Upper





1. Remove the spark plug wires from spark plugs and retaining clips.
2. Remove the wiring harness from fuel rail.
3. Disconnect the ignition control module connector from the ignition control module assembly.
4. Remove the ignition control module assembly nuts.
5. Remove the ignition control module assembly.





6. Remove the fuel injector rail nuts.
7. Remove the fuel injector rail.





8. Remove the engine wiring harness heat shield bolt and nut.
9. Remove the engine wiring harness heat shield.





10. Remove the throttle body nuts and bolts.
11. Remove the throttle body.
12. Remove the throttle body seal.





13. Remove the upper intake manifold bolts and studs.
14. Remove the upper intake manifold.