Horn: Service and Repair

HORN REPLACEMENT

REMOVAL PROCEDURE




1. Open the hood.
2. Remove the RH headlamp assembly.
3. Disconnect the horn electrical connector.




4. Remove the horn bracket bolt.
5. Remove the horn from the frame rail extension.

INSTALLATION PROCEDURE




1. Position the horn assembly to the frame rail extension. Insert the horn anti-rotation tab into the slot on the frame rail.
2. Install the horn bracket bolt.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolt to 15 N.m (11 lb ft).




3. Connect the horn electrical connector.
4. Install the RH headlamp assembly.
5. Close the hood.