Accelerator Pedal Position Sensor: Service and Repair

ACCELERATOR PEDAL WITH POSITION SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Remove the left instrument panel (I/P) sound insulator.
2. Disconnect the accelerator pedal position (APP) sensor electrical connector.
3. Remove the accelerated pedal bolts (2).
4. Remove the accelerator pedal (1) from the vehicle.

INSTALLATION PROCEDURE




1. Position the accelerator pedal (1) to the vehicle.
2. Install the accelerator pedal bolts (2).

NOTE: Refer to Fastener Notice.

Tighten the bolts to 5 N.m (44 lb in).

3. Connect APP sensor electrical connector.
4. Install the left I/P sound insulator.