Interior - Gap Between Body and Center Pillar Trim
Bulletin No.: 08-08-53-001Date: January 14, 2008
TECHNICAL
Subject:
Lower Garnish Molding Trim Does Not Fit Properly Gap Between Body and Trim (Replace Lower Garnish Molding Trim Fastener)
Models:
2006-2008 Buick Lucerne
Condition
Some customers may comment that the trim panel between the front and rear doors does not fit properly. A gap may be seen between the body and the trim.
Cause
This condition may be caused by the trim faster not being engaged to the sheet metal.
Correction
Replace the two fasteners at the base of the center pillar trim. Refer to Center Pillar Lower Garnish Molding Replacement in SI.
Parts Information
Warranty Information
For vehicle repaired under warranty, use the table.
Disclaimer