54. Pump Installation

Pump Installation

^ Tools Required
- J 39068 Pump Assembly Guide Pins





1. Install the J 39068 into the case.
2. Install the new gasket (228).
3. Install the pump assembly (200-225).





4. Apply pipe thread sealant, GM P/N 12346004 to pump bolt threads before installation.
5. Hand start all of the bolts (229, 231, 232, 233, 234, 235, 331).





6. Notice:
Refer to Fastener Notice in Service Precautions.

Remove the guide pins and install the remaining bolts.
Tighten the bolts in sequence in a clockwise pattern to 11 - 13 Nm (8.0 - 9.5 ft. lbs.).