Rear Door Window Motor: Service and Repair

Rear Side Door Window Regulator Motor Replacement

Removal Procedure




1. Remove the rear door trim panel.
2. Remove the rear door water deflector.

Notice: refer to Paint Damage Notice.

3. Remove the window regulator.
4. Remove the window regulator and motor through the access opening in the door panel.
5. Remove the window regulator motor bolts from the window regulator.

Installation Procedure





Notice: refer to Fastener Notice.

1. Install the window regulator motor bolts to the window regulator.

Tighten the bolts to 6 N.m (53 lb in).

2. Install the window regulator and motor through the access opening.
3. Install the window regulator.
4. Remove the masking tape.
5. Inspect the window for proper operation.
6. Install the rear door water deflector.
7. Install the rear door trim panel.