Seat Back Replacement - Rear (Non-folding)

Seat Back Replacement - Rear (Non-folding)

Removal Procedure

1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement .




2. Remove the rear seat back nuts from the child seat latch bracket.




3. Grasp the bottom of the rear seat back and lift upward to disengage the hangers (1).
4. Remove the rear seat back from the vehicle.



Installation Procedure

1. Position the rear seat back to the vehicle.




2. Hook the seat back hangers (1) into the metal slots.





Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the rear seat back nuts to the latch bracket.

Tighten the nuts to 10 N.m (89 lb in).

4. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .