Power Steering Pump Pulley Replacement

Power Steering Pulley Replacement (3.8L)

Tools Required
* J 25033-C Pulley Installer
* J 25034-C Pulley Remover

Removal Procedure

1. Remove the power steering pump from the engine for clearance.




2. Using J 25034-C remove the power steering pump pulley from the power steering pump.

Installation Procedure





Important:
* Never use a hammer to install the power steering pulley.

* The face of the power steering pulley hub must be flush with the end of the power steering pump driveshaft.

Using J 25033-C install the power steering pump pulley to the power steering pump.
1. Install the power steering pump to the engine.
2. Fill the power steering system. Refer to Checking and Adding Power Steering Fluid.
3. Bleed the power steering system.
4. Inspect the power steering system for leaks.