Differential Carrier Internal Gear Assemble

Differential Carrier Internal Gear Assemble

Tools Required

J 28585 Snap Ring Remover




1. Inspect the differential carrier internal gear assembly (693) for the following conditions:

* Damaged or worn bushings
* Plugged lube oil holes
* Damaged case splines
* Damaged or worn gear teeth
* A damaged or worn park pawl assembly (694)
* A damaged snap ring (692)




2. Install the differential carrier internal gear assembly (693) into the case. Align the park pawl assembly with the park pawl actuator assembly.




3. Use J 28585 or a long screwdriver in order to install the snap ring (692) into the case as shown.