Exhaust Gas Recirculation Valve Adapter Replacement

Exhaust Gas Recirculation Valve Adapter Replacement

Removal Procedure




1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the exhaust gas recirculation (EGR) valve adapter pipe bolt.
3. Lower the vehicle.
4. Remove the EGR valve.
5. Remove the EGR valve outlet pipe.




6. Remove the EGR valve adapter bolts.
7. Remove the EGR valve adapter.

Installation Procedure




1. Position the EGR valve adapter to the cylinder head.

Notice: Refer to Fastener Notice.

2. Install the EGR valve adapter bolts.

Tighten the bolts to 50 N.m (37 lb ft).

3. Raise the vehicle.




4. Install the EGR valve adapter pipe bolt.

Tighten the bolt to 25 N.m (18 lb in).

5. Lower the vehicle.
6. Install the EGR valve outlet pipe.
7. Install the EGR valve.